The editor makes it easy to change the fonts and color. But if you do, be sure to close the tags, otherwise your formating codes don't take effect and the tags show through.
If you don't close the tags, it ends up looking like:
Unclosed formatting tags.
How it should look in the editor:
[font=Comic Sans Ms][size=4]Correctly formated tags.[/size][/font]
The easiest way to get the formating codes correct is to type your text first, then select the text you want formated, then select the formating you want. When you select formating with text selected, the application assumes that is the text you want formated and puts the opening codes in front and the closing tags at the end for you.
You may have noticed a red/orange box image next to some of the topic titles that looks like this:
That little red/orange box has some nice functionality. When it appears, it means there are unread posts in that topic. If you click on it, it takes you to the very first post you have not read yet.
Try it out.
Of course, all the older threads have this box since we did not port the who's-read-what database. But, you can mark an entire forum as read so that the next time you come in, only the topics that have new posts show the box.
Too mark a forum as read, click on the Forum Options box in the upper right side of a forum, and select "Mark forum as read."
Are you planning to enable HTML tags at some point in the future? (if you know HTML, its sometimes easier just to write the tags rather than use the interface to insert UBB tags)
BTW, I like the 'look and feel' of the new boards in general. Nice job!
Are you planning to enable HTML tags at some point in the future?
There is a security issue with enabling HTML for posting. Although the software takes precautions on checking HTML in posts, it's not foolproof. Certain HTML commands can be destructive, whether intentional or unintentional.
There is a security issue with enabling HTML for posting. Although the software takes precautions on checking HTML in posts, it's not foolproof. Certain HTML commands can be destructive, whether intentional or unintentional.
Fair enough. I understand the point. Can you post a link of supported UBB tags and attributes then? The help page says there is supposed to be such a list available as a popup, but I don't see how to get access to it.
Awwright, what's with the limit on the number of smileys you can use in a single post? I mean, I can understand not wanting a whole page full of them, but I had to cut down on the number of them to about 6-7 in a row a recent post.
Recommended Posts
Top Posters In This Topic
13
9
9
7
Popular Days
Sep 24
21
Sep 25
15
Sep 27
12
Sep 28
6
Top Posters In This Topic
GT 13 posts
excathedra 9 posts
krys 9 posts
Kit Sober 7 posts
Popular Days
Sep 24 2005
21 posts
Sep 25 2005
15 posts
Sep 27 2005
12 posts
Sep 28 2005
6 posts
krys
re: avatars
If we have something that moves, will this board show that motion?
Link to comment
Share on other sites
moony3424
Yep :)
Link to comment
Share on other sites
Bob
A note on formating posts.
The editor makes it easy to change the fonts and color. But if you do, be sure to close the tags, otherwise your formating codes don't take effect and the tags show through.
If you don't close the tags, it ends up looking like:
Unclosed formatting tags.
How it should look in the editor:
The easiest way to get the formating codes correct is to type your text first, then select the text you want formated, then select the formating you want. When you select formating with text selected, the application assumes that is the text you want formated and puts the opening codes in front and the closing tags at the end for you.
Edited by BobLink to comment
Share on other sites
GT
You may have noticed a red/orange box image next to some of the topic titles that looks like this:
That little red/orange box has some nice functionality. When it appears, it means there are unread posts in that topic. If you click on it, it takes you to the very first post you have not read yet.
Try it out.
Of course, all the older threads have this box since we did not port the who's-read-what database. But, you can mark an entire forum as read so that the next time you come in, only the topics that have new posts show the box.
Too mark a forum as read, click on the Forum Options box in the upper right side of a forum, and select "Mark forum as read."
Link to comment
Share on other sites
markomalley
Are you planning to enable HTML tags at some point in the future? (if you know HTML, its sometimes easier just to write the tags rather than use the interface to insert UBB tags)
BTW, I like the 'look and feel' of the new boards in general. Nice job!
Link to comment
Share on other sites
GT
There is a security issue with enabling HTML for posting. Although the software takes precautions on checking HTML in posts, it's not foolproof. Certain HTML commands can be destructive, whether intentional or unintentional.
Link to comment
Share on other sites
markomalley
Fair enough. I understand the point. Can you post a link of supported UBB tags and attributes then? The help page says there is supposed to be such a list available as a popup, but I don't see how to get access to it.
I very much so appreciate it.
Link to comment
Share on other sites
GT
Look's like the last upgrade removed the link, but the help topic is still here.
What each BBCode does
I'll see if I can force the link back into the posting section.
Link to comment
Share on other sites
markomalley
Thank you very much!
Link to comment
Share on other sites
Kit Sober
Nice forum.
Thanks for all your nice work.
What is the address of the gallery of carry-over pictures?
Link to comment
Share on other sites
pawtucket
Kit this is it, it is integrated with the forum
http://www.greasespotcafe.com/ipb/index.ph...&module=gallery
Link to comment
Share on other sites
GarthP2000
Awwright, what's with the limit on the number of smileys you can use in a single post? I mean, I can understand not wanting a whole page full of them, but I had to cut down on the number of them to about 6-7 in a row a recent post.
What's up with that? :huh:
Link to comment
Share on other sites
Kit Sober
I was looking for the address of my Elvis picture (I don't have it anymore).
Link to comment
Share on other sites
GT
The current limit is the default. To have it increased, you'll need to petition Paw. B) :o
Link to comment
Share on other sites
GarthP2000
(sigh) :huh:
((getting on my knees in begging position and putting on my best {{sniffles}} act))
:(
Edited by GarthP2000Link to comment
Share on other sites
dmiller
Hi Kit. This isn't exactly the same, but perhaps it is an acceptable substitute?
http://www.images.google.com/images?q=tbn:...6.com/elvis.gif
David
Link to comment
Share on other sites
WhiteDove
Kit Here ya go!
http://www.greasespotcafe.com/forum-images/elvis.gif
Link to comment
Share on other sites
dmiller
WhiteDove -- B) B) B)
Link to comment
Share on other sites
krys
My rose moves on my computer, but it isn't moving now. Howcome? It is supposed to open.
Thanks for answering me.
Edited by krysilisLink to comment
Share on other sites
Raf
Is there a time limit on editing old posts? I tried to remove my logo from an old post and couldn't.
Edited by RafLink to comment
Share on other sites
GT
The image you have has your avatar is a jpg. As far as I know, only gif images can contain animation. Do you have a gif version on your PC?
There is a time limit of 2 hours for editing a post.
Link to comment
Share on other sites
Kit Sober
Thanks so much.
The kindness of you-all is sincerely appreciated.
Link to comment
Share on other sites
GarthP2000
A-Yup! And after that, your foo-pahh then remains for ALL posterity. :D :o
........
... Uh ohh. ... Better check some of my earlier posts.
:blink:
Link to comment
Share on other sites
Weout1200
:( I miss my tiger avatar.
Any way I can get him back?
Edited by Weout1200Link to comment
Share on other sites
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.