Galen- I had just considered the problem as part of life and why the french developed Bidets
These toilets won't splash and the centrex model shoud be tall have enough height to accomidate the angles and dangles of an ex submariner like yourself :D-->
"Galen- I had just considered the problem as part of life and why the french developed Bidets"
See I knew that others must be observing the same thing that I observe.
"These toilets won't splash and the centrex model shoud be tall have enough height to accomidate the angles and dangles of an ex submariner like yourself"
Of course any thread that says "men only" I am going to have to check out.
Have you ever considered just raising the seat? Many elderly people have those seat raisers that fit on top of the toilet bowl. My dad has one that raises him about 5 inches when he sits on "his throne" (that's what he calls it}. He got it because he has congestive heartfailure and arthritis and it is difficult for him to get out of a seated position.
Seems like that would solve the problem of getting wet or dangling delicates in disgusting "pools".
It seems to be sort of a catch-22 there Galen... the further you distance your 'hardware' from the water, the bigger splash the 'torpedoes' might make (from falling farther)... hmmm... I don't know if you can necessarily have one without the other... unless you choose to "go dry" as per ckeer's models... I think I'd choose the "no dangle" option and take my chances on the splashes...
“Not to sound ignorant but, would it be smart to hold the one while using the other? I did not know that this would be an issue for some folks.”
Hmm, I have attempted this feat. And many times I do just that. Uh, in my ‘plumbing’ when I am operating one valve, often times the other valve with crack open and a dribble will flow out as well. Operating one valve at a time, and only one valve at a time, as not always possible. For example, to hold the hose coming from one valve (I will call it valve #1) while attempting to operate the other valve (let us say valve #2) would often give cause to leakage from the hose of the first valve #1.
I learned long ago, to never operate a fire hose without proper control and targeting, for in other nearby equipment could get wet.
Tom-
“I think I'd choose the "no dangle" option and take my chances on the splashes...”
I do, and as I pointed out in the beginning of this thread, I don’t really care for those splashes. If men are truly those who design all things commercial, then why haven’t commodes been designed with men in mind?
Trefor-
“Here in the UK the distance between seat and puddle is approx 9”. No splash probs to report and I wonder if Galen is boasting?”
True. While living in Scotland, I don’t recall this being such an issue.
I did not intend any such boast.
Tom-
Salads make less splash?
I thought it was much more a matter of proximity to the water.
Galen, I'd think they'd make smaller "bombs"... now I know this is heavy on your heart... but I can't come into this thread anymore... I feel like I need to go take a shower now...
You might not need a new toilet, Galen. The flushing problem could be caused by an inadequate or blocked sewer vent, rather than the toilet itself. If the toilet sometimes actually backs up, the problem could be a partial blockage in the trap part of the toilet, caused by something that was dropped in, but didn’t make it around the curve when flushed.
Whether or not you replace the toilet, you may be able to lower the water level in the bowl, either by constricting the little hose that trickles water into the bowl while the tank is filling or by aiming the hose so that only part of the stream goes down the vertical pipe in the center of your tank.
If you’ve exhausted all other possibilities and you’re really, really desperate, I guess you could employ a desperate measure, but I wouldn’t suggest that.
Ummm, Shell, the complete topic wasn't just toilets, but having body parts dangling into said toilets, and backsplash onto other body parts while using said toilets.
So, are you saying that people other than men have things that dangle into toilets?
What on you dangles into a toilet? I'm curious, now.
“You might not need a new toilet, Galen. The flushing problem could be caused by an inadequate or blocked sewer vent, rather than the toilet itself. If the toilet sometimes actually backs up, the problem could be a partial blockage in the trap part of the toilet, caused by something that was dropped in, but didn’t make it around the curve when flushed.”
The original flushing problem is fixed for now, thank you.
This one has not been backing up, just slow flushes requiring secondary flushes.
This building has three heads (or ‘bathrooms’ to civilians) they are all ‘stacked’ exactly on top of each other; a three story-building with heads in the same place, each drains into a vertical 6” cast-iron pipe. That pipe necks down to 2” and goes out through the roof as a vent. Our head feeds into the bottom of this 35’ tall column just before the 6” pipe elbows 90* and goes down a gentle grade 70’ and into the sewer underneath the street. The bathtubs from the first and second floors as well as the sinks from all three floors all drain into this 6” pipe to keep things moving along. The third floor apartment was actually an attic and was converted in the mid 80’s (that’s 1880’s in case you were wondering) into an apartment. It’s ceilings are all gabled roof tops, it’s head only has normal height while standing in the center of the room, It did have a bathtub but to get into said tub you had to crouch down and duck your head, as the tub was up against the ceiling. I recently replaced that tub (cast iron with claw feet from a factory in 1915) with a shower stall that I trimmed to fit. The first floor crapper only needs to move jetsam about one foot and the flow from above will carry it away.
When I suspect blockage I routinely use 150 psi air to blow such blockages out into the street.
“Whether or not you replace the toilet, you may be able to lower the water level in the bowl, either by constricting the little hose that trickles water into the bowl while the tank is filling or by aiming the hose so that only part of the stream goes down the vertical pipe in the center of your tank.”
Actually I just ‘raised’ the level of water in the water-closet by 2 more inches. Which had an immediate effect on flushing characteristics.
Tom-
I have used outhouses and I rather prefer them.
People, this was truly meant as a serious topic. When I have gone into hardware stores and asked about the average distance from seat to puddle they look at me like I am stupid.
Here in the UK the distance between seat and puddle is approx 9".
No splash probs to report and I wonder if Galen is boasting?
Same is here in Australia re seat to puddle distance.
Still doesn't stop the little pools of wee ending up on the floor that inevitably occur. With the diameter of toilet bowls being as they are, surely men could aim a little better???? :P-->
quote: Since America views water as a non-renewable natural resource we have passed laws to limit how much of this non-renewable resource each flush uses.
Galen -- this law only applies to new models, right? You can find "used" models where renovation and remodeling of homes is being done, or where building demolition will be taking place.
One person I know, rents to college kids who trash the rentals on a regular basis. When the kids move out, she has to replace lots of items, including things like toilets, and bathroom sinks. She charges a "hefty" damage deposit from them, and frequently has to utilize it.
She never shops for new. Driving around town with an open eye for construction remodeling sites, or even contacting local companies at their main office, she has always been able to find what she needed, and at a good price.
Perhaps you could do the same. Find an "older model that will be discarded, and purchase it. Most, if not all, are in perfect working order. One man's trash, can be your treasure. And the older model will eliminate your frustrations, as well as other things! :)-->
When asked what was worn under the kilt, the Scot replied --
"Nothing is worn. It is all in perfect working order!"
Recommended Posts
Top Posters In This Topic
22
5
5
7
Popular Days
Jun 27
37
Jun 26
34
Jul 5
5
Aug 15
5
Top Posters In This Topic
Galen 22 posts
excathedra 5 posts
Mary Cate 5 posts
dmiller 7 posts
Popular Days
Jun 27 2004
37 posts
Jun 26 2004
34 posts
Jul 5 2004
5 posts
Aug 15 2004
5 posts
excathedra
ok damnit
http://www.kbbonline.com/kitchenandbath/ideas/toilets.jsp
i'll try to do more research
Link to comment
Share on other sites
ckeer
Galen- I had just considered the problem as part of life and why the french developed Bidets
These toilets won't splash and the centrex model shoud be tall have enough height to accomidate the angles and dangles of an ex submariner like yourself
:D-->
http://www.promolife.com/products/compostt...1.htm?iorb=4764
Link to comment
Share on other sites
Galen
Dear sweet Ex-
http://www.kbbonline.com/kitchenandbath/ideas/toilets.jsp
Even this site, more goes to further prove my point.
Style, colour, pressure, one-piece or two, rond bowl or eblong; all nice things to know, but they dont address the issue.
Link to comment
Share on other sites
Galen
ckeer:
"Galen- I had just considered the problem as part of life and why the french developed Bidets"
See I knew that others must be observing the same thing that I observe.
"These toilets won't splash and the centrex model shoud be tall have enough height to accomidate the angles and dangles of an ex submariner like yourself"
Sure no water, equals no splash, hmm.
"Angles and dangles" cute, real cute.
Link to comment
Share on other sites
Mary Cate
Of course any thread that says "men only" I am going to have to check out.
Have you ever considered just raising the seat? Many elderly people have those seat raisers that fit on top of the toilet bowl. My dad has one that raises him about 5 inches when he sits on "his throne" (that's what he calls it}. He got it because he has congestive heartfailure and arthritis and it is difficult for him to get out of a seated position.
Seems like that would solve the problem of getting wet or dangling delicates in disgusting "pools".
Link to comment
Share on other sites
Cynic
Galen,
I concur with the previous poster. If the problem occurs only while you're seated on the toilet, a thicker "raised" toilet seat might provide relief.
If it occurs while you're standing, however, you might try standing on stools of various heights and contacting some Hollywood agents.
Link to comment
Share on other sites
imbus
Galen,
Not to sound ignorant but,would it be smart to hold the one while using the other? I did not know that this would be an issue for some folks.
Link to comment
Share on other sites
Galen
Thank you for your heartfelt concern.
I have no difficulty while standing.
Link to comment
Share on other sites
Tom Strange
It seems to be sort of a catch-22 there Galen... the further you distance your 'hardware' from the water, the bigger splash the 'torpedoes' might make (from falling farther)... hmmm... I don't know if you can necessarily have one without the other... unless you choose to "go dry" as per ckeer's models... I think I'd choose the "no dangle" option and take my chances on the splashes...
Link to comment
Share on other sites
Trefor Heywood
Here in the UK the distance between seat and puddle is approx 9".
No splash probs to report and I wonder if Galen is boasting?
Link to comment
Share on other sites
Tom Strange
...or needs to eat more salads...!
:D-->
Link to comment
Share on other sites
Zshot
I just saw a commercial about a toilet that uses a pump/plunger mechaniscm to "push" the water through the system.
Current toilets basicaly use a lever a gravity to push the water through the system.
Also, you just reminded me of a old (non-politically correct) army cadance...
Part of it goes as follows...
Don't let your dingle dagle,
dangle in the dirt
:P--> 
:D--> 
Link to comment
Share on other sites
Galen
Imbus-
“Not to sound ignorant but, would it be smart to hold the one while using the other? I did not know that this would be an issue for some folks.”
Hmm, I have attempted this feat. And many times I do just that. Uh, in my ‘plumbing’ when I am operating one valve, often times the other valve with crack open and a dribble will flow out as well. Operating one valve at a time, and only one valve at a time, as not always possible. For example, to hold the hose coming from one valve (I will call it valve #1) while attempting to operate the other valve (let us say valve #2) would often give cause to leakage from the hose of the first valve #1.
I learned long ago, to never operate a fire hose without proper control and targeting, for in other nearby equipment could get wet.
Tom-
“I think I'd choose the "no dangle" option and take my chances on the splashes...”
I do, and as I pointed out in the beginning of this thread, I don’t really care for those splashes. If men are truly those who design all things commercial, then why haven’t commodes been designed with men in mind?
Trefor-
“Here in the UK the distance between seat and puddle is approx 9”. No splash probs to report and I wonder if Galen is boasting?”
True. While living in Scotland, I don’t recall this being such an issue.
I did not intend any such boast.
Tom-
Salads make less splash?
I thought it was much more a matter of proximity to the water.
Link to comment
Share on other sites
Tom Strange
Galen, I'd think they'd make smaller "bombs"... now I know this is heavy on your heart... but I can't come into this thread anymore... I feel like I need to go take a shower now...
Link to comment
Share on other sites
Shellon
Only men know about toilets?
pffffffffft
Link to comment
Share on other sites
LG
You might not need a new toilet, Galen. The flushing problem could be caused by an inadequate or blocked sewer vent, rather than the toilet itself. If the toilet sometimes actually backs up, the problem could be a partial blockage in the trap part of the toilet, caused by something that was dropped in, but didn’t make it around the curve when flushed.
Whether or not you replace the toilet, you may be able to lower the water level in the bowl, either by constricting the little hose that trickles water into the bowl while the tank is filling or by aiming the hose so that only part of the stream goes down the vertical pipe in the center of your tank.
If you’ve exhausted all other possibilities and you’re really, really desperate, I guess you could employ a desperate measure, but I wouldn’t suggest that.
Link to comment
Share on other sites
Tom Strange
Here's what we have... and we don't have problems with "dangles" or "splashes"...
Link to comment
Share on other sites
Steve!
Ummm, Shell, the complete topic wasn't just toilets, but having body parts dangling into said toilets, and backsplash onto other body parts while using said toilets.
So, are you saying that people other than men have things that dangle into toilets?
What on you dangles into a toilet? I'm curious, now.
Link to comment
Share on other sites
Galen
Long-
“You might not need a new toilet, Galen. The flushing problem could be caused by an inadequate or blocked sewer vent, rather than the toilet itself. If the toilet sometimes actually backs up, the problem could be a partial blockage in the trap part of the toilet, caused by something that was dropped in, but didn’t make it around the curve when flushed.”
The original flushing problem is fixed for now, thank you.
This one has not been backing up, just slow flushes requiring secondary flushes.
This building has three heads (or ‘bathrooms’ to civilians) they are all ‘stacked’ exactly on top of each other; a three story-building with heads in the same place, each drains into a vertical 6” cast-iron pipe. That pipe necks down to 2” and goes out through the roof as a vent. Our head feeds into the bottom of this 35’ tall column just before the 6” pipe elbows 90* and goes down a gentle grade 70’ and into the sewer underneath the street. The bathtubs from the first and second floors as well as the sinks from all three floors all drain into this 6” pipe to keep things moving along. The third floor apartment was actually an attic and was converted in the mid 80’s (that’s 1880’s in case you were wondering) into an apartment. It’s ceilings are all gabled roof tops, it’s head only has normal height while standing in the center of the room, It did have a bathtub but to get into said tub you had to crouch down and duck your head, as the tub was up against the ceiling. I recently replaced that tub (cast iron with claw feet from a factory in 1915) with a shower stall that I trimmed to fit. The first floor crapper only needs to move jetsam about one foot and the flow from above will carry it away.
When I suspect blockage I routinely use 150 psi air to blow such blockages out into the street.
“Whether or not you replace the toilet, you may be able to lower the water level in the bowl, either by constricting the little hose that trickles water into the bowl while the tank is filling or by aiming the hose so that only part of the stream goes down the vertical pipe in the center of your tank.”
Actually I just ‘raised’ the level of water in the water-closet by 2 more inches. Which had an immediate effect on flushing characteristics.
Tom-
I have used outhouses and I rather prefer them.
People, this was truly meant as a serious topic. When I have gone into hardware stores and asked about the average distance from seat to puddle they look at me like I am stupid.
Link to comment
Share on other sites
Zshot
I have a theory concerning the water level in the bowl...
It might be possible the depth be determined the baramotric (sp) pressure in your area, in conjunction with the elevation above sea level.
just a thought...
Link to comment
Share on other sites
The Girl From Oz
Same is here in Australia re seat to puddle distance.
Still doesn't stop the little pools of wee ending up on the floor that inevitably occur. With the diameter of toilet bowls being as they are, surely men could aim a little better????
:P-->
Link to comment
Share on other sites
The Girl From Oz
Hey Tom,
We call those things "dunnies" here in Oz. No problem of dangling or splashes when there's a 10 foot drop!
Link to comment
Share on other sites
dmiller
Galen -- this law only applies to new models, right? You can find "used" models where renovation and remodeling of homes is being done, or where building demolition will be taking place.
One person I know, rents to college kids who trash the rentals on a regular basis. When the kids move out, she has to replace lots of items, including things like toilets, and bathroom sinks. She charges a "hefty" damage deposit from them, and frequently has to utilize it.
She never shops for new. Driving around town with an open eye for construction remodeling sites, or even contacting local companies at their main office, she has always been able to find what she needed, and at a good price.
Perhaps you could do the same. Find an "older model that will be discarded, and purchase it. Most, if not all, are in perfect working order. One man's trash, can be your treasure. And the older model will eliminate your frustrations, as well as other things!
:)-->
When asked what was worn under the kilt, the Scot replied --
"Nothing is worn. It is all in perfect working order!"
Link to comment
Share on other sites
Abigail
well I'm with whoever said it first - you say "for men only" and I just have to look.
That being said, the awful images running through my head are, I suppose, completely my own fault.
However, Galen, I am extremely grateful we have never met in "real life" and I have no face to put with the image, so to speak.
Link to comment
Share on other sites
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.